Top 10 Wanaho Duplicator I3 Cooling

0

We spent many hours on research to finding wanaho duplicator i3 cooling, reading product features, product specifications for this guide. For those of you who wish to the best wanaho duplicator i3 cooling, you should not miss this article. wanaho duplicator i3 cooling coming in a variety of types but also different price range. The following is the top 10 wanaho duplicator i3 cooling by our suggestions

770 reviews analysed

1. Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Feature

Description

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

2. Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm

Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm

Feature

Description

This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

3. 220x220x3mm Borosilicate Glass Bed Flat Polished Edge w/Corners Cut for Wanhao Duplicator i3 Anet A8 MP Maker Select MK2/MK2A 3D Printers with 4 Glass Clips

220x220x3mm Borosilicate Glass Bed Flat Polished Edge w/Corners Cut for Wanhao Duplicator i3 Anet A8 MP Maker Select MK2/MK2A 3D Printers with 4 Glass Clips

Feature

Description

Advantages:

Glass Print bed is a universal upgraded build plate printing surface for 3D Printer. It can make your printing platform flat enough.

Compared to ordinary glass, Borosilicate glass material has excellent thermal and chemical properties.

Compared with the typical 4mm plates, the 3mm plates are thinner and lighter, heats up faster.

As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.

The Borosilicate glass bed has high binding power when heating. Easy to separate the plastic parts when cooling.

Easy clean with water/alcohol.

 

Features:

Dimensions: 220x220mm, 3mm thick.

100% borosilicate heat resistant glass.

Flat polished edge for safe to handle.

Very flat and does not warp during use, make your printing platform flat enough.

 

Compatble:

Maker Select

Wanhao Duplicator

Anet A8

Any heated bed 220x220mm

 

Note:

1.Please take a look at the dimensions and details.

2.There will be some errors on the surface of glass.

3.The glass can be used normally at 60 degree temperature.

4.You need to adjust the Z axis limit switch up and down when installing.

5.Apply some 3d printing solid glue on the glass surface on before printing.

6. The Glass Print Bed’s thickness of 0.5 mm is within the normal range.

 

Package content 

1 x 220x220x3mm Borosilicate Glass

4 x glass clips

4. All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm

All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm

Feature

Description

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

5. All Metal Hotend with Slotted Cooling Block for Wanhao i3

All Metal Hotend with Slotted Cooling Block for Wanhao i3

Feature

Description

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

6. All Metal Hotend with Slotted Cooling Block for Wanhao i3

All Metal Hotend with Slotted Cooling Block for Wanhao i3

Feature

Description

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

7. All Metal Hotend kit with Slotted Cooling Block for Wanhao i3 /Wanhao i3 Plus and All Other i3 Clones

All Metal Hotend kit with Slotted Cooling Block for Wanhao i3 /Wanhao i3 Plus and All Other i3 Clones

Feature

8. [Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.

[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.

Feature

Description

Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor.

NTC 3950 HEX thermistor features:

M3x0.5 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block.
Wiring insulation: fiberglass.
Wiring length: 130mm.
Connector type: JST XHP.
NTC 100K thermistor 3950K beta A value.
Use TEMP SENSOR number 11 in Marlin.
High accuracy: 1%.
Resistance value at 25°C=100K

Package contents:

1 x HEX stud NTC 3950 100k Thermistor for Wanhao / Maker Select.

9. Micro Swiss CNC Machined Lever and Extruder Plate for Wanhao i3 (Full Kit)

Micro Swiss CNC Machined Lever and Extruder Plate for Wanhao i3 (Full Kit)

Feature

Description

This is a replacement lever and extruder plate for Wanhao i3 and all of its clones. Lever and plate are CNC machined from 6061 billet aluminum, with weight reduction features. It will replace a stock plastic assembly that has tendency to warp over time from heat and force. This is a direct replacement, with no modification needed.

10. FYSETC 3D Printing Parts MK10 Silicone Cover Heater Block Silicone Socks Temperature Extremely Stable for Wanhao i3 Makerbot MK10 Style Extruders – 3 Pack Black+Blue

FYSETC 3D Printing Parts MK10 Silicone Cover Heater Block Silicone Socks Temperature Extremely Stable for Wanhao i3 Makerbot MK10 Style Extruders - 3 Pack Black+Blue

Feature

Description

Size:MK10 | Color:Black | Number of Items:3

Feature:
Size: 22 x 22 x 16 mm/ 0.8 x 0.8 x 0.6 inch

Package includes:
3 x Black MK10 Silicone Sock
1 x Blue MK10 Silicone Sock

Please Note: not includes Heater Block

Conclusion

By our suggestions above, we hope that you can found Wanaho Duplicator I3 Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general