861 reviews analysed
1. Kreg KHCRA Automaxx Right Angle Clamp
- The quick, easy way to hold pocket-hole joints at 90 Degree during project assembly—now with Automaxx technology
- Pin on one jaw fits into the pocket hole, while a swiveling pad on the other jaw holds the mating piece
- Design reaches into pocket holes on the inside or outside of 90 Degree case assemblies.
This Clamp Makes Pocket-Hole Joints As Easy To Clamp As They Are To Make. One Side Of The Adjustable Locking Plier Clamp Is Formed Into A Pin That Mates Perfectly Into A 3/8″ Pocket Hole, And The Other Side Has A Swivel Pad That Allows The Clamp To Align Perfectly With The Mating Surface. Comfort Grips Eliminate Pinching When Releasing The Clamp. Once You Try The Race You Will Wonder How You’ve Been Doing Pocket-Hole Joints Without It. Also Great For Assembling All Types Of Box Joints. Now with Automaxx Technology it is the quick and easy way to hold pocket-hole joints at 90 degrees during project assembly.
2. Irwin Tools Clamp-On Vise, 3", 226303
The IRWIN Clamp-On Vise can attach to tables up to 2″ thick to work almost anywhere. Designed with an anvil shaping horn, it features sturdy pipe jaws with a 2″ capacity for general purpose and light-duty work.
From the Manufacturer
The IRWIN 226303 3-Inch Clamp on Vise provides you with the ability to take it with you wherever you go. This forged iron vise has a clamping pressure of 1250-Pound. The IRWIN vise gives you excellent pressure in the convenience of a portable vise.
3. IRWIN Woodworking Vise, 6-1/2-Inch (226361)
4. SHOP FOX W1727 1 HP Dust Collector
Shop Fox W1727 1 Hp 800 Cfm Portable Dust Collector 9″ Balanced Steel Impeller
5. Kreg Jig K4 Pocket Hole System
The Kreg Jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig® K4 can help you finish the job in less time, and with far less effort than you ever thought possible. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as “Drill. Drive. Done!”
From the Manufacturer
The Kreg Jig is the perfect choice for DIY’ers and anyone new to pocket-screw joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project and with joints as easy as “Drill. Drive. Done!” You’ll actually want to finish it. The Kreg Jig makes every joint you build faster and stronger, but perhaps more importantly, it makes them easier. Simple two-step operation, combined with easy thickness adjustments, built-in depth-setting-gauges, a large clamping recess and our patented 3-hole drill guide, make this the most easy-to-use Kreg Jig we’ve ever made. Includes everything you need to get started with pocket-screw joinery, including Kreg Jig, stepped drill bit, 6-inch square driver, dust collection shroud, starter screw set, starter plug set, skill builder DVD and quick-start guide, all inside a compact and durable carrying case.
6. Ametek 116765 Lamb Central Vacuum Motor
- Price For: Each Hz: 60/50 Phase: 1 Ins. Class: A No. of Speeds: 1 Motor/Blower Type: Bypass Motor Mounting Type: Lug Discharge: Tangential Ambient Temperature: 40 Degrees C Blower Stages: 3 Item: Vacuum Motor Motor Mounting Position: All Angle Bearings: Ball Motor Thermal Protection: None Motor Design: Universal AC/DC Duty: Intermittent
- Standards: UL Recognized (E47185), CSA Certified (LR31393) Footnotes: 68, 72 Vacuum (H2O Sealed): 137.1 Max. Amps: 13.5 Motor Enclosure Design: Open Max. Air Watts: 485 Replacement Brushes: 2UV68 CFM @ 2-In. Orifice: 101.2 Body Dia.: 5.7″ Average Life: 500 hr. Voltage: 120 Overall Height: 8-1/3″ Mounting Brackets: Metal Country of Origin (subject to change): Mexico
7. Shop Fox W1826 Wall Dust Collector, 2.5 Micron Filtration
This wall mounted Dust Collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. With 537 CFM capacity, it will handle just about any hungry woodworking machine, and with no complicated duct system, static pressure loss is minimal. A simple wall mounted bracket and locking screw system also ensures you’ll be safely up and running in no time!
8. Bessey BVVB Vacuum Base Vise
- Vacuum base mounts on any smooth work surface for work holding where you need it
- Vise can be rotated 360-Degree and pivoted 90-Degree to positon wrk optimally with out removing clamped part from the vise jaws
- Protective jaw caps incldued for hold parts without marring
- Steel and die cast parts for durability
9. Kreg K5 Pocket-Hole Jig
- The new Kreg Jig K5 is packed with features your are sure to appreciate
- It comes with a convenient front-mounted clamping handle, and it’s connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts
- The quick-release Drill Guide Block makes set up simple
- Front-mounted clamp handle makes clamping easy
- Ratcheting clamp mechanism adjusts without tools
- Quick-release pin holds drill block in place, and can’t get lost
- Storage Wings provide built-in storage for bits, screws, accessories
- Stop-Collar Setting Block makes drill bit setup easy
The New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It’S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet.
10. WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
By our suggestions above, we hope that you can found Vacuum Clamps Woodworking for you.Please don’t forget to share your experience by comment in this post. Thank you!