620 reviews analysed
1. Oxygen Sensor Socket A7841F-FBA Offset Wrench Remover Tool and Thread Chaser Set 5 PCS set
- 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don’t have a lot of experience working with cars. This high quality tool can save your time!
- 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability – Finished with Black Oxide to prevent rust.
- 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
2. Motorad MGC819 Fuel Tank Cap
- MotoRad fuel caps are made with OEM-quality materials and safety standards by an OE Supplier. Specifically designed pressure and vacuum relief valves prevent evaporation of fuel. They pass all state and federal emissions requirements.
- A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year. MotoRad fuel caps prevent fuel loss, saving you money and time. Additionally, they help prevent the flow of fuel from the tank filler neck when a car is in an accident, including rollovers.
- MotoRad fuel caps are made from durable, long-life materials that reduce air pollution with proper sealing and venting. They are independently tested for emission control that meets the most stringent industry standards.
- Fits select Acura, Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Honda, Lexus, Lincoln, Mazda, Nissan, Oldsmobile, Pontiac, Plymouth, Subaru, Toyota, and Volkswagen applications. Be sure to select your vehicle above to verify this product will fit your specific application.
- Replaces F42Z9030A , F5AZ9030B , 3527385 , NTC5418 , ZZL042250A , F5TZ9030B , F32Z9030A , F4DZ9030A , F5RZ9030A , 3542094 , ZZL042250 , and ZZM042250.
3. Motorad MGC-817 Fuel Cap
- Manufactured to pass all state and federal emissions requirements
- Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel
- Manufactured with OEM quality materials and safety standards
- A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year
- A “tethered” version is also available, MODEL #MGC-817T
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
4. Phoenix Systems (2006-B V-12 Petro Pump
5. UAC CO 10905C A/C Compressor
- Brand New, OE replacement: UAC branded FS20 Compressor Assembly
- 100% Guaranteed Fit! Add your car (year/make/model) to Amazon’s garage to confirm
- Premium ISO/TS 16949 quality
- tested to meet or exceed OEM specifications
- Includes: body, clutch, pulley & coil
- compressor may come charged with shipping oil to keep the part lubricated during transit – drain and replace according to your system’s requirements
- All units are pressure tested with nitrogen for leaks to ensure product quality
- product is backed by industry leading warranty
Compressors are the heart of the A/C system, with a heavy responsibility to pump A/C refrigerant throughout the automobile’s A/C system. That’s why at UAC, we take the upmost care when developing new compressors. We always make sure that our new UAC branded compressors meet exact OE specifications, and that they are manufactured at a tier 1 facility. When you purchase a new compressor from UAC, you are receiving a high quality product at price that is very affordable.
6. Stant 10834 Automotive Accessories
7. Mazda BP6D-14-420C Engine Variable Timing Solenoid
8. Spectra Premium VTS1131 Variable Valve Timing Solenoid
- Ensures reliable gas mileage at a fraction of the cost of an Original Equipment Manufacturer (OEM) replacement
- Fit and road tested to ensure dependable real world performance
- OE level reliability and function
- Designed for the perfect fit every time
- Engineered to stringent tolerances based on Spectra Premium’s Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Spectra Premium new variable valve timing solenoids are built from the ground up using precise manufacturing and quality control to protect the driver and his or her vehicle from any engine difficulties that can be encountered on the road. The advanced technological design integrated in these solenoids minimises negative impacts while ensuring dependable gas mileage and reducing harmful emissions.
9. Stant Fuel Tank Cap P/N:10834
Fuel Tank Cap
10. Mazda Miata ND Trunk Rack Unique Design, No Clamps No Straps No Brackets No Paint Damage
Revo rack is a completely different, a unique new type of Trunk Luggage Rack, only manufactured by us. Why a Revo-Rack Luggage Rack ? Fits in 30 seconds no tools required, no fiddly brackets or bolts. With the tiny panel gaps on the ND between the trunk lid & the rear quarter fitting a conventional rack without damaging the trunk/deck lid edge or surface is almost impossible, there is literally no space for a clamp. If your Miata ND has the shark antenna fin on the trunk lid, you will have to move the single vacuum cup to one of the cross rails to centrally mount the rack. No straps or clamps on the trunk surface/edge No paint damage. Designed and conceived for the Miata ND. Revo Racks load carrying capacity has been rated at 44Ibs Supplied with two luggage straps and storage bag. Made in the UK by the boot-bag group Parcels Despatched next working day if ordered before 3pm using UPS This luggage rack is manufactured from 1″ T5 tubing this is an aluminium and magnesium alloy (It will never rust) As a result the rack frame weighs only 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36″x17″ The rack is secured to your boot/trunk lid using three 4.5 inch vacuum cups, rated as capable of holding a 40lb load each, technically the rack can hold 119Ibs. The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960’s to hold film camera’s to cars, and is still in use today. For more detailed information please see www.revo-rack.com Revo-racks design is protected by UK, EU and North American Patents.
By our suggestions above, we hope that you can found Mazda Miata 2002 Vacuum Sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!