The Best Heating Manifold Gasket

Brand New Intake Manifold Kit (Upgraded Design)
Kit includes Upper Intake Manifold / Plenum With Gasket, PCV Valve, Throttle Body Gasket, & Needed Hardware
Fits 1995-2005 GM 3.8L 3800 Series II V6 Engine
Replaces GM Part #: 89017272, 217-454, 12537425, 24506013, 89017274
This upgraded version has the EGR tube input area thickened and metal adapters included. This metal adapter prevents the hot exhaust gases from causing the common melting problem that allows coolant to leak from the coolant passage to the throttle body area.. A common symptom is a check engine light on with a Throttle Position Sensor (TPS) fault code. Also the engine will want to surge and have erratic throttle response. You may also want to inspect and/or just replace the lower intake manifold gasket as it has a tendency to leak oil. The lower intake gasket is sold separately and is not always needed.
For The All Aluminum Lower Intake Manifold, See APDTY 726391

INTAKE GRID HEATER GASKETS FOR 5.9 Liter DODGE/CUMMINS ENGINE. (The Package Contains two Gaskets)

Note: Only Authorized dealers can offer you the Alliant Power warranty

Authorized Alliant Power Dealers:
1) Diamond Diesel & Turbocharger Service

ALLIANT POWER PART # AP0058
OEM #:3969988

This Intake Grid Heater Gaskets fits the following vehicles:
YEAR RANGE —— APPLICATION:
1989-1998 ——– 5.9L B-Series12-Valve
1998-2003 ——– 5.9L ISB with VP44
2003-2006 ——– 5.9L ISB with Common Rail

All Alliant Power Parts come with a 13 month guarantee

Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex’s unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex have been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket should be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.

Brand New Exhaust Manifold Kit
Cast Iron Manifold With Gasket & Heat Shield 2.5L
Fits 1983-1984 AMC Eagle w/2.5L
Fits 1996-2002 Dodge Dakota w/2.5L
Fits 1983-1986 Jeep CJ7 w/2.5L AMC Engine
Fits 1984-2000 Jeep Cherokee (XJ Model) w/2.5L
Fits 1986-1992 Jeep Comanche w/2.5L
Fits 1983-1985 Jeep Scrambler w/2.5L
Fits 1984-1987 Jeep Wagoneer w/2.5L
Fits 1987-2002 Jeep Wrangler w/2.5L
Replaces Jeep 53008860, 3242625, 33002509, 4713055

California Proposition 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fell-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Brand New Exhaust Manifold Kit
Kit Includes Gaskets, Heat Shield & Downspout Hardware
Fits 2008-2009 Chevy Trailblazer w/ V6 4.2L Engine
Fits 2008-2009 GMC Envoy w/ V6 4.2L Engine
Fits 2008 Isuzu Ascender w/ V6 4.2L Engine
Fits 2008-2009 Saab 9-7x w/ V6 4.2L Engine
Replaces 12597166, 12637060, 8-12597-166-0

California Proposition 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex’s unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex have been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket should be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.

Fits: 170 Car (’60-’71) Truck (’60-’69), 198 Car (’70-’74) Truck (’70-’73), 225 Car (’60-’83) Truck (’60-’87). See Part Number 6008b for Individual Riser Gasket. Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex’s unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex has been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket “should” be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with Remflex gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.

Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex’s unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex have been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket should be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.