531 reviews analysed
1. Hayden Central Vacuum System Kit
- Hayden Central Vacuum System Kit: Powerhead with quick disconnect wand, 3-Position height adjustment, Overload reset, Headlight, Cogged belt, color may vary: blue, silver or black according to availability and at Seller’s discretion.
- 30FT Electric Hose: Pigtail or Direct Connect configurations options are available. Please specify your requirements upon purchase.
- Standard hose with any standard 1.5 inch inside diameter wall valve. Please measure your wall valves carefully and if less than 1.5 inch, contact Seller as you might need an adaptor.
- Free Technical Support, call 929.800.2980
Hayden Central Vacuum System Kit: Powerhead with foot release, 3-Position height adjustment, Overload reset, Headlight, Cog belt, 30-foot Electric Hose30FT Hose: pigtail or direct connect configuration. Please specify your requirements upon purchaseFree Technical Support, call 929.800.2980.
2. Cen-Tec Systems CT20DXQD Quiet Drive Vacuum Electric Brush
- Compatible with major brands of central vac, including: Beam
- Air Vac. Excels in deep carpet cleaning
- Includes wand release, wrap around bumper, headlight, reset button and a height adjustment
- Quiet Drive poly-v belt is always in contact,, which results in a dual brushed edge cleaning so no dirt escapes
- Can be used to replace a Nutone CT600
- Works with major central vacuum brands as long as one uses a compatible wand and hose set.
3. Wessel Werk EBK 360 Power Nozzle with Integrated Wand for Central Vacuum Systems
The German engineering of the EBK360 by Wessel Werk means you can be sure you are getting a high quality, deep cleaning powerhead. With an impressive 5 position carpet height adjustments, quick neck release and wand release you get convenience plus versatility. The bright LED headlight will save energy and last longer than traditional headlights. The Wessel-Werk EBK360 has a rubber strip and soft rubber wheels making it ideal for use, not only on carpeting, but also on bare floors. With a chevron designed roller brush the effectiveness of the brush roller and it’s cleaning ability is maximized. Sale is for EBK360 and integrated wand only.
4. Cen-Tec Systems CT25 91596 Central Vacuum Electric Brush
- A four position height adjustment is ideal for use on both traditional or high density soft carpets
- A double swivel neck for improved maneuverability
- Compatible with major brands of central vac, including Beam, No one, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Quiet Drive poly V belt for long life, which is positioned away from the end of the agitator, providing true edge cleaning to both sides of the nozzle
- Headlight, quick wand release, a low profile and high styling speak to the quality of the Response II CT23
5. Cen-Tec Systems 92938 Central Vacuum CT20DXQD Kit with 35′ DC Hose
- Compatible with all major brands of central vacuums with these inlets including beam, Electrolux, eureka, nutone, vacumaid, vacuflo, husky, canavac, cyclovac, md and imperium
- Package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the power nozzle from the hose handle
- The 35 foot hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle
- The quiet drive poly-v drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning
- 14 inches wider power nozzle
The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.
6. Cen-Tec Systems 93048 Central Vacuum Kit with Switch Control, 40 Ft. Hose
- The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves
- Compatible with all major brands of central vacuum systems equipped with standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, Hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
- The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use
The 93048 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93048 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
7. H TurboCat Air Driven Brush for All Central Vacuums (White)
8. Cen-Tec Systems 93642 Central Vacuum Low Voltage Kit 35 Ft. Hose Light Gray
- Includes a 1.375” x 35 foot pearl gray low volt hose providing on off control of the central vacuum from the 360 degree swivel handle
- The hose is a soft crown, lightweight crushproof construction that resists kinking and won’t mark furnishings or floors. The wall end is designed to be compatible with industry standard wall inlets with split low voltage contacts
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, hoover, cyclovac, vacuflo, vacumaid, md, m&s, husky, canavac, Honeywell, and well as most regional brands
- The premium chrome telescopic wand features cen-tec’s trademarked button down to make it easy to release the wand from the hose handle for use of the premium accessories
- Features a 12” hard floor brush with natural fill to protect hardwood, tile, marble, stones, and vinyl flooring from marks or scratching
- The hose and most of the accessories are manufactured in the usa
- The 10.5” automatic combination nozzle is ideal for carpets and area rugs and can pass across different floor surfaces without the need to make adjustments to the tool
Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.
9. TurboCat Air Driven performance Brush for all Central Vacuums (Gray)
- Air Turbine Central Vacuum Powerhead
- No Batteries or additional power needed – runs off your Central Vacuum
- The make-up of the Turbo Cat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Two Year manufacturer’s warranty – instruction manual care & maintenance included
The TP-210 Turbo Cat utilizes a horizontal turbine design to keep the profile of the tool at a minimum for cleaning under and around furnishings. The T-shape permits cleaning up close to the legs of tables and chars. It also has a soft wrap around bumper and an agitator insures consistent performance on even the highest pile carpets. The turbine is black in color. The Turbo Cat requires NO separate power cords, batteries, or additional electricity. It also contains a unique brush roller, resulting in enhanced airflow and enhanced dirt pick up. The chevron pattern design includes dual height bristles to ensure constant contact with the floor surface. It’s quiet as a mouse, with its bearing insulators which hold it firmly in place, reducing vibration. The easy glide wheels provide top of the line maneuverability and responsiveness.
10. Broan-NuTone CT150B Deluxe Combination Floor/Rug Tool Central Vacuum Hose Attachment
By our suggestions above, we hope that you can found Hayden Central Vacuum Powerhead for you.Please don’t forget to share your experience by comment in this post. Thank you!