649 reviews analysed
1. HP Products 9880 Dirt Devil Central Vacuum System
2. Cen-Tec Systems 93048 Central Vacuum Kit with Switch Control, 40 Ft. Hose
- The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves
- Compatible with all major brands of central vacuum systems equipped with standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, Hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
- The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use
The 93048 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93048 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
3. Cen-Tec Systems 91431 Complete Central Vacuum Accessory Kit with Metal Wands
- Designed to provide a basic set of accessory tools for a central vacuum. The 91431 features a 1.25” x 30 foot non-electric hose produced using a unique process that provides a very smooth interior for superior airflow and quieter use
- The 13” metal friction curved end is designed to swivel over the hose meaning less stress on you and the hose. Friction indicates that all tool to tool connections are made by the two parts wedging, pressing together without a physical locking mechanism
- The wall end is an industry standard 1.50” on the outer diameter making it compatible with all major central vacuum inlets which have a 1.50” inlet with the exception of a nutone branded inlet which has a slightly smaller opening
- The package features two chrome wands with nylon friction collars to help them stay in place without them wedging together so they can never be separated. A 12” natural fill floor brush and a combination nozzle which is ideal for area rugs door mats. A basic accessory set including a 10” crevice, 4” dusting tool, and 5” upholstery. The mesh caddy bag allows you to collect and store the tools on the hose hanger with the hose in a bag that gives you visibility
- The 91431 is compatible with all major brands of central vacuum including beam, eureka, vacuflo, vacu-maid, imperium, cyclovac, star power, canavac, Hayden, air vac, md, and nutone systems not using the nutone branded square inlet
- Industry standard wall valves and utility inlets on central vacuums that include this feature have the same inner diameter and will accept this hose end. The metal band will activate the low voltage control of your vacuum turning it on as it is inserted
The 91431 is designed to be a general use straight air accessory set for the home, shop, or garage. Often it is used as a second tool set Complimenting the power nozzle or Turbine package that came with the central vacuum. Having a second tool set can save you time and effort moving a tool set from floor to floor in multi-story homes. The hose end is designed for what has historically been industry standard inlets and will activate a system with low voltage contacts in the wall valve. There were a few valves typically produced before 1980 which may use a micro-switch for activation of the vacuum. In most cases the 91431 will still work but the automatic activation of the system will not be delivered by the banded cuff. The set includes a full range attachments for most standard household cleaning jobs. This set is deal for a basement, garage, or general use in the home, especially on hard floor areas. The floor brush is ideal for cleaning hardwood, tile, stone, and vinyl.
4. Wonlives Universal Replacement 32mm (1 1/4 inch Vacuum attachments) and 35mm (1 3/8 inch) Vacuum Accessories Dusty Brush Kit for Standard Hose Set of 7
- Vacuum cleaner attachments are made of high-strength and environmental protection material, durable, high-performance, and very easy to install.
- Universal vacuum attachments is suitable for use with standard 32mm (1 1/4in) and 35mm (1 3/8inch) diameter vacuum cleaners
- Work saving attachments for above the floor cleaning, for upholstery, drapes, Venetian blinds, fine furniture and car interiors
- The electronics vacuum attachments are save money ,economical and practical vacuum cleaner accessory set
- 7 pieces vacuum cleaner attachements accessory kit includes crevice tool, horsehair bristles round brush, utility nozzle with brush, upholstery tool, brush & nozzle combination tool, and 35mm(1 3/8inch) to 32mm (1 1/4 inch) adapter
Universal Replacement 32mm (1 1/4 inch) Vacuum Cleaner Accessories Brush Kit for Standard Hose Set of 7 By Wonlives
High quality, robust plastic construction
Suitable for use with standard 32mm (1 1/4in) diameter vacuum cleaners
Save money ,economical and practical vacuum cleaner accessory set
Wet or dry vacuum crevices tool for cleaning tight spaces
Utility nozzle with plastic brush, the brush can be removed, for floor cleaning
Horsehair bristles round brush, for cleaning and dusting tables and counter tops
Nozzle Combination Tool, designed to clean the crevice and dust the board
Upholstery tool ,Anti-static Perfect for cleaning sofa, stairs and small areas
1* horsehair bristles round brush
1*utility nozzle with brush
1* upholstery tool
1* nozzle combination tool
1*35mm(1 3/8inch) to 32mm (1 1/4 inch) adapter
The kit is only for vacuums accepting 32mm or 35mm inner diameter vacuum cleaners, Please measure and confirm your vacuum attachments inner diameter before purchasing
5. Universal 1.25-Inch Extension Wands 1-1/4inch Vacuum Accessory 34.2 inch Extension Wand 2 Pieces
- Enable the vacuum to reach hard to reach places, such as under furniture and high places
- The inner diameter of the large end is 32mm, the outside diameter of the small end is 31mm. Work with 1-1/4inch(32mm) hose end
- Length: 17.7inch, 2 extension wand can be extend to 34.2inch
- Fit many vacuum brands accepting 1-1/4inch inner diameter attachment
- 2 wands included
1-1/4inch(32mm) iner diameter extension wand, only for vacuums accepting 32mm wands. Please make sure your vacuum size or measure the size of your vacuum before purchasing.
6. EZ SPARES Replacement Turbo Brush Head 1 1/4 inch 32mm,Universal Vacuum Cleaner Brush Fits Most Vacuum Brands,Hoover Eureka Royal Dirt Devil Kirby Rainbow Kenmore,Shop vac
- EZ SPARES SUPPLY THE BEST SPAREPARTS FOR OUR CUSTOMERS.
- Inner diameter is a standard 1 1/4 Inch (32 mm)size for all standard vacuum brands such as Hoover, Bissell, Eureka, Royal, Dirt Devil,Kirby, Rainbow,Kenmore and so on.
- It is a high quality brush with smooth rolling wheels,PP hair,rolling wheels and anti-collision rubber strip around the brush.Built-in Roller and Wind Wheel to Strengthen Suction.A button on the brush will help you adjust suction as required.
- Beautiful appearance with bright colors like IRON MAN. Clean your house with a good mood.
- Designed and manufactured by EZ SPARES.Good quality and long service life.If you have any questions, please feel free to contact us..
7. Replacement Crevice Tool
8. EZ SPARES 1 1/4 inch 32mm Universal Vacuum Cleaner Euro Floor Brush Head Brush Attachment for Floor and Carpet Combo Tool New Designed to Fit Hoover, Eureka, Rainbow,Kenmore,Shop VAC
- Inner diameter is a standard 1.25″(32mm) size for most vacuum brands,please check the right size (Inner Diameter)
- It is a high quality brush with Anti-static cloth,PP hair and two pedals.
- 2 New Functions choose: The brush head is dual purpose brush with two models for floor or carpet.
- The brush will take good care of house floor and furniture without tired.
- This is a really good deal on a decent floor tool. Works well on carpet, or hard floors.
EZ SPARES 1 1/4 inch 32mm Universal Vacuum cleaner Brush Head Brush With Metal Base ,Metal Lifting , Plant Bristle , Double Pedals Fits Vaccum Brands Hoover?Bissell, Eureka, Dirt Devil, Rainbow…
Shipping List: 1 brush
The inner diameter:1 1/4 inch(32mm) . Please check the right inner diameter.
Applicable Model : For Most Vacuum Cleaner except Shark,Vorwerk.
Note: Please allow 1-3mm error due to manual measurement.
Since the establishment of our company in 2009,we have been committed to produce and supply the best spareparts of home appliances for the customers in the world.
Now we are offering the most comprehensive coverage of electrical appliance replacement parts for households over 40 countries.Choose EZ SPARES, we will be your good helper to provide a more convenient,comfortable and healthier lifestyle for you and your family.
9. Eagles Hardwood Floor brush with 1-1/4" Extension Wands Remplacement for most vacuum cleaner Accepting 1-1/4" Attachment
- 1. 1-1/4″ inner diameter Vacuum Floor Brush and 1-1/4″ extension tube fits most vacuum cleaners who accept 1-1/4″ vacuum hose such as Hoover, Bissell, Eureka, Royal, Dirt Devil,Electrolux,Panasonic, Kenmore,Shop Vac, Oreck etc.
- 2. The vacuum cleaner brush attachment made of natural horsehair bristles 12″ wide cleaning path made this type of suction head good ideal for absorbs dust and garbage on the ground or wall,expert for wooden floors with no scratching.
- 3. 1-1/4″ stable stainless steel extension wands extend the length up to 31″,combinate with 360 Degrees Swivel brush enable it get arougnd and under furniture and hard-to-reach places.
- 4. This is a replacement vacuum cleaner accessories, Please be sure the size before purchasing.not for Shark and Miele Vacuum cleaners
- 5. 90-days money-back guarantee will be provide on our Vacuum Cleaner accessories,for any reason you are not satisfied with your purchase, please contact us feel free.
Type:1-1/4″ Vacuum Hardwood Floor brush
Material: soft horse hair
10″ wide cleaning path
1 1/4″ wand size
Type: 1-1/4″ Extension Wands Vacuum Cleaner Accessories
Big head inner diameter: 32mm
Small head outer diameter: 31mm
Length after stretching: 31″
fits most vacuum cleaners requirs 1-1/4″ vacuum hose such as Hoover, Bissell, Eureka, Royal, Dirt Devil,Electrolux,Panasonic, Kenmore,Shop Vac, Oreck etc.
1 x vacuum floor brush attachment
1 x 32mm Vacuum Hose Chrome Wand Pipe
By our suggestions above, we hope that you can found Central Vacuum Attachments Dirtdevil for you.Please don’t forget to share your experience by comment in this post. Thank you!