The Best Auto Heating And Cooling Temp Controller

0

Nowadays, there are so many products of auto heating and cooling temp controller in the market and you are wondering to choose a best one.You have searched for auto heating and cooling temp controller in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings auto heating and cooling temp controller which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

774 reviews analysed

1. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect

Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect

Feature

Description

Size:ITC-308S+LONG probe

Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;

Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)

Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual

2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control

Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control

Feature

Description

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

3. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A

bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A

Feature

4. Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat

Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat

Feature

5. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A

bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

Feature

6. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000

Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000

Feature

7. DIGITEN Digital Programmable Thermostat Plug, 2 Stage Outlet Pre-Wired Heating & Cooling Temperature Controller for Fermentation Seed Germination Reptiles and Brewing Breeding Incubation Greenhouse

DIGITEN Digital Programmable Thermostat Plug, 2 Stage Outlet Pre-Wired Heating & Cooling Temperature Controller for Fermentation Seed Germination Reptiles and Brewing Breeding Incubation Greenhouse

Feature

8. Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling

Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling

Feature

Description

Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.

Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year

Package Included:
1 x Temperature and Time Controller
1 x Manual

9. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing

Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing

Feature

10. MYPIN® Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy: 0.2%

MYPIN® Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy: 0.2%

Feature

Description

This is a bid for set of temperature controller TA6-SNR, K type thermocouple and solid state relay SSR-25DA. The dual line display universal digital programmable temperature controller supports many types of thermocouple sensor. It can be powered by 90-265V AC/DC, Comsumption:5VA. DIN 1/8. It can also worked as simple digital adjustor; The solid state relay SSR-25DA;The 6 feet K type thermocouple.

Temperature Controller, model no. TA6-SNR

Character:

a.Individually programmable PID control or ON/OFF control. 

b.Auto-tuning PID adjustment
c.Compact design. DIN 1/8, great form-factor to be included/build-in to your product

Specifications

Display: Dual display for Fahrenheit(F) and Celsius(C)
Range: -1999 to 9999 (depends on the input signal)
Input: Thermo Resistor: PT100, Cu50
Thermocouple: J,S,K,E,Wre3 ~ Wre25
Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC
Manual/Auto-tuning PID cooling/heating control(or normal alarm output)
1 RELAY alarm:Normal open, capacity 250V/3A AC or 30V/3A DC
7 different Dual Output combinations with: high / low / high deviation / low deviation/ interval / out of interval /breakage alarm
Accuracy: 0.2%
Dimension: DIN: 1/8 (48WmmX96HmmX80Lmm) /Approx. 1.89*3.78*3.15 inch
Net Weight: about 300g /10.5 oz

Solid state relay, SSR-25DA

Load Voltage: AC 24-380V
Load Current: 25A
Input Voltage: DC 3-32V

Packing details: 1x temperature controller, model no.: TA6-SNR
1x solid state relay,model no.: SSR-25DA
1x K type thermocouple

NOTE: If you need a PT100 Temperature Sensor,Please search Asin on Amazon: B00X6RIARO. Customer is first,We try our best to offer

Conclusion

By our suggestions above, we hope that you can found Auto Heating And Cooling Temp Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general